Aluminum coils

1060 Aluminum Coil Strip 0.2mm Metal Pure Aluminum Coil

2025-06-03      https://www.aluminum-coils.com/a/1060-aluminum-coil-strip-02mm-metal-pure-aluminum-coil.html

In the expansive world of industrial metals, the 1060 aluminum coil strip stands out as an epitome of purity and performance. Specifically, a 0.2mm thickness 1060 aluminum coil strip offers manufacturers and fabricators a reliable solution for applications requiring excellent formability, corrosion resistance, and conductivity.

The "1060" designation refers to an aluminum alloy characterized by its unusually high purity - 99.6% aluminum content. This alloy is classified under the "1000" series aluminums, renowned for their exceptional corrosion resistance, excellent thermal and electrical conductivity, and viscoelastic mechanical properties. The 1060 aluminum coil strip diameter and weight vary depending on customer specification, but the temper, thickness, and quality control align strictly to internationally approved standards.

Chemical Composition (%)

ElementContent Range (%)
Aluminum (Al)≥ 99.6
Iron (Fe)0.35 max
Silicon (Si)0.25 max
Copper (Cu)0.05 max
Manganese (Mn)0.03 max
Magnesium (Mg)0.03 max
Zinc (Zn)0.05 max
Titanium (Ti)0.03 max
Others0.15 max total

This high degree of purity is imperative to maintain the material’s intrinsic physical properties, notably in applications demanding stretched sheets with flexibility and electrical portfolios such as conductors.

Parameters and Implementation Standards

  • Thickness: 0.2mm (with minor tolerances; typically ±0.01mm depending on supplier precision)
  • Width: Customizable – typical ranges span from 20 mm up to 1200 mm
  • Length: Supplied in coils, typical length depends on coil weight and mill specifications
  • Alloy Temper: Common temper designations are O (annealed), H14/H24 (strain-hardened conditions) offering various degrees of hardness and strength to suit different fabrication needs
  • Density: Approximately 2.71 g/cm³
  • Standards: Conforming to internationally accepted benchmarks such as ASTM B209, JIS H4000, EN 485-2 allowing predictable mechanical consistency and finishes for every application sector

Alloy tempering critically influences its mechanical properties. The 1060 aluminum coil in an O temper is fully annealed, granting it maximum ductility ideal for metal forming processes like bending, deep drawing, or embossing. H14 and H24 provide incremental strain hardening without compromising material flexibility.

Functionality Spotlight: Physical & Mechanical Properties of the 1060 Aluminum Coil Strip 0.2mm

  • Corrosion Resistance: The formation of a stable oxide layer initiates an outstanding resistance to atmospheric, chemical corrosion and moisture attack, important for outdoor equipment and packaging.
  • Formability: Thanks to the near-pure aluminum content and soft O temper condition, a 0.2mm coil exhibits total elongation greater than 25%, making the coil susceptible to winding, shaping, and stamping.
  • Electrical and Thermal Conductivity: High electrical conductivity, exceeding 59% IACS at room temperature, makes the 1060 aluminum coil optimal for use in stranded and braided wires, sheet metal in electrical appliances, and heat sinks.
  • Surface Finish: It accepts anodizing, painting, and glazing coatings exceptionally well, enabling versatile aesthetic application modules used in automotive hood trims, lighting reflectors, and decorative panels.
  • Lightweight Nature: The low density helps reduce weight in transportation, packaging, and structural materials preserving strength-to-weight benefits allied with durability.

Mechanical Properties (Typical data for 0.2mm Thickness, Annealed O Tempers)

PropertyValue
Tensile Strength65 MPa (minimum)
Yield Strength22 MPa (minimum)
Elongation≥ 25%
Hardness (HB)20 (Brinell Hardness)

Distinctive Applications: Where Does 1060 Aluminum Coil Strip Shine?

  • Electrical Industry:Because of its high conductivity, the 1060 aluminum strip is used in manufacturing transformer windings, electrical busbars, electrical appliances casings, and circuit breakers.

  • Packaging Sector:The 0.2mm strip in coils yields versatile usability for creating food containers, pharmaceutical blister packs, wrappers, and seal containers due to sanitary and corrosion-resistant characteristics.

  • Signage and Decorative Facades:Owing to its smooth anodizing response and ease of coloring, 1060 coils are often favored to develop signage lamination and architectural paneling.

  • Automotive Industry:Wrap-around trims, heat exchangers, and interior components frequently exploit its ductility, enabling complex shapes without interrupting strength.

  • Heat Sinks and Reflectors:The excellent thermal conductivity makes this alloy well-matched for cooling devices and reflectors for lighting, optimizing thermal dissipation.

Inquiry

Please fill in the form Or send email to us : [email protected]