2022-11-21 https://www.aluminum-coils.com/a/1070-hot-rolled-aluminum-plate-for-zinc-electrolysis.html
Material: Aluminum 1070 (produced by DC system, hot rolled) for Zinc ElectrolysisSize:7 x 1037 x 1964 mm
Electrical Conductivity Min.: 58% IACS
Tensile Strength Min.: 110 MPa Yield Strength Min.: 101 MPa Hardness Min.: 30 HB
Chemical Composition Limits:
| Al | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | B | Others |
| 99,7 min. | 0,100 | 0,250 | 0,005 | 0,010 | 0,010 | - | - | 0,040 | 0,010 | 0,002 | 0,030 |
Dimensional Tolerances:
Width: - 0,0/+5,0 mm Length: ± 3,0 mm Thickness: ± 0,10 mm Surface mill finish
Geometric Tolerances:
Flatness: ± 2,0 mm Parallelism: ± 2,0 mm
Difference between diagonals: ± 2,00 mm
