2022-12-31
Roller coil is based on coating roll as the carrier of coating. The coating forms a wet film with a certain thickness on the surface of the coating roll. With the help of the contact between the coating roll and the co
2022-12-30
Hair line surface aluminum coil sheet is a manufacturing process in which aluminum sheets are repeatedly scraped out of lines with sandpaper. The process flow is mainly divided into three parts: de-esterification, sand
2022-12-29
Brushed aluminium paint coil is a manufacturing process of repeatedly scraping aluminum sheets out of lines with sandpaper. The main process flow is divided into three parts: de-esterification, sand mill, and water wash
2022-12-28
Color fire door fire panel is light in texture, has good plasticity and ductility, and is favored by large-scale projects. The thickness of the substrate is generally between 1.0mm-3.0mm, and the width is customized a
2022-12-27
JM Aluminum is a special double sided color , we use 1060 1100 3003 3105 aluminum coil. After cleaning, chromizing, roller coating, baking and other processing, the surface of the aluminum coil is coated with vario
2022-12-25
Color electrical panel refers to the coloring treatment of the surface of aluminum alloy. Because the performance of aluminum alloy is very stable, it is not easy to be corroded. Generally, the surface layer can be gua
2022-12-24
Color for container body mainly adopts 5-series double-sided ultra-wide color , the decorative surface is high-gloss, bright white, and the epoxy surface has strong foaming adhesion. Color- has a beautiful appearance
2022-12-23
AW1200 H42 clear varnish coil is a special AW1200 H42 clear varnish coil. After cleaning, chromizing, roller coating, baking and other processing, the surface of the aluminum coil is covered with various colors of pa
2022-12-22
The main alloy elements in the 6061 alloy are magnesium and silicon, which have moderate strength, good corrosion resistance, good weldability and good oxidation effect. They are widely used in variou
2022-12-21
, which is made of pure aluminum or aluminum alloy material through pressure processing (shear or sawing), is made of rectangular material with uniform thickness in cross section
2022-12-20
its state difference of T6 and T651 is that under normal circumstances, T6's internal stress will be relatively large, the processing will be deformed, the most suitable state of processing should be
2022-12-19
is available in -T651 temper in standard widths up to 60.5”, and in thicknesses ranging from .250” to 3”. precision aluminum plate is so fl at, tolerances are guaranteed even af